Contact Us at Email:






Manufacturing Facility

 The manufacturing facility consists of 3 Independent Manufacturing Blocks and 1 Separate Milling Room.The installed capacity is more than 10 KL per shift for Liquid orals with dedicated Stainless Steel tanks for manufacturing and filling, 750kg granules for tablets per shift & 2000 Kg for Powder per shift.

Production Area
Each manufacturing block has processing area and Filling for liquid orals & Capsules, Compression, Coating for tablets and primary packing area like Alu Alu & Blister Packing area for tablets & Capsules, Pouch filling, Induction sealing & Sleeving in Jars for powders with dedicated machines.

The corridors have Forced Draft Filter air filtered through 5 Micron filters. The primary filling areas have HEPA Filters with Air condition and controlled temperature & Relative Humidity.

The warehouse is equipped with 2 dedicated hoists for transfer of Raw Materials, Packing Materials and Finished Product. The entire passage of the warehouse is supplied with Froced Draft Ventilation. The Raw Materials and Finished Products are stored in dedicated rooms with Tempreature Control and Monitoring.

Quality Control
The manufacturing facility is also supplemented with a well equipped Quality Control Laboratory which has state of the art equipment like HPLC, GC, FTIR etc. which are required for all kinds of pharmacopieal analysis. A separate microbiology section with primary and secondary change rooms and Laminar Airflow unit is provided for carrying out microbiological analysis.

Enviornmental Management
The manufacturing site adheres to its commitment to the enviornment by treating the effluent generated by the site within the prescribed norms before discharging the same to the centralised effluent treatment plant. To this affect a Solvent Stripping and Recovery System and a Effluent Treatment Plant has been installed and is opearted and monitored on daily basis.